Lowering the rear of an air spring equipped H2
 

Hi, I have heard that it is possible to reprogrammed the rear air spring so that the height can be lowered so that the rear part of the h2 will match the front part of the vehicle.
Because usually the rear of a standard H2 is little higher than the front.

Is this true ?

Any thoughts ?

Thanks.

Re: Lowering the rear of an air spring equipped H2
 

Why not raise the front with the torsion keys to match the rear? Would be simpler and takes 5 Minutes. Why would you want to loose ground clearance...

Re: Lowering the rear of an air spring equipped H2
 

Just crank the T bars up an inch and get the alignment checked after the crank. If your air system is working good leave it alone.

Re: Lowering the rear of an air spring equipped H2
 

I need to lower the rear maybe by 1 inch since I live in a condominium with a garage that can accomodate vehicles with height that has to be lower than 6 feet 8 inches.

Any thoughts ?

Thanks

Re: Lowering the rear of an air spring equipped H2
 

TAKE OFF THE ROOF RACK ,DON'T SCREW WITH A PROPERLY WORKING AIR SUSPENSION.

Re: Lowering the rear of an air spring equipped H2
 

Roof rack would be the best idea to get it a bit lower.