Toyo M/T 37x13.50R22 without a Lift?
 

Any issues running this size tire without a lift? I need to replace my BFG MT

Thanks

Re: Toyo M/T 37x13.50R22 without a Lift?
 

I'm sure the response you'll get frome Everyone else is that you can crank the torsion bars a bit and 37's will fit fine.

Re: Toyo M/T 37x13.50R22 without a Lift?
 

There will be some rubbing on the frame at full lock, but otherwise it should be ok.

Re: Toyo M/T 37x13.50R22 without a Lift?
 

Wouldn't fit my 04. But I had the cash reserved for the lift, so it wasn't a big deal.

Forget about how much clearance you have test fitting the tires stationary...You gotta remember if your driving down the road and hit your brakes, your front end if going to drop. You need to make sure you have adequate room for a loaded suspension. There is pinch weld on the cab side of the front wheel wells behind the liner that i'm sure would do a nice job cutting tires. If your gonna chance it, i'd atleast beat that over flat.

Your rig is going to drive like a piece of **** cranking on your bars...