Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   injector upgrde info (http://www.elcovaforums.com/forums/showthread.php?t=42267)

rogco 01-23-2012 05:52 AM

injector upgrde info
 
so ive been doing lots of reading and have no idea what to step up to in injector size . Im looking at putting on ls6 heads ported witha mid low cam and kennybell boost a pump and i know the stock injectors are already maxed out so after doing those up grades what injector size should i step up too

Hellz 01-23-2012 12:22 PM

Re: injector upgrde info
 
let me know what you find out on this..

i would be somewhat interested in doing this same kind of setup..

[__--MUD--__] 01-24-2012 04:30 AM

Re: injector upgrde info
 
Have you looked at what the 6 liter truck heads are capable of?? There is a reason alot of people are buying those...

You are going to need a custom tune on your ecm. check out performancetrucks.net You should easily find a matched component setup for what your trying to do.

I'd budget in your build a new tranny...they dont last long adding additional power to them. You will squeak a little more life out of it if you upgrade the servos- You dont need to pull the tranny to do this.

rogco 01-24-2012 10:17 AM

Re: injector upgrde info
 
I've already installed the servos and have a bigger pan and rad for tranny plus I have a shift kit sitting in my shop waiting to go in. So tranny should hold for a bit

EuroHummer 01-24-2012 05:49 PM

Re: injector upgrde info
 
Call FAST and tell them your setup. They will recommend the proper injectors. Just had to change the connectors on mine to make them work.

rogco 01-25-2012 02:38 AM

Re: injector upgrde info
 
They sell the connectors also or where did you get tose connectors

glennf1 01-25-2012 05:15 AM

Re: injector upgrde info
 
I've read good things about Mad Dog Transmissions. Anyone used them or know anything about them for tranny upgrades? www.maddogtransmissions.com

rogco 01-25-2012 05:29 PM

Re: injector upgrde info
 
eurohummer , how do you like running gears for timing instead of chain . i want to end up ith your set up down the road or someting like it

EuroHummer 01-26-2012 06:08 PM

Re: injector upgrde info
 
FAST sells the connector ends you need.

I am running an SA Gear double roller set, not a gear drive.

glennf1 01-27-2012 12:45 AM

Re: injector upgrde info
 
Quote:

Originally Posted by rogco
eurohummer , how do you like running gears for timing instead of chain . i want to end up ith your set up down the road or someting like it


Running gears is really going to be noisy, but then again that might not be a bad thing :cool:

rogco 03-15-2012 01:40 AM

Re: injector upgrde info
 
so how do i get my hands on a custom tune there is no shops within 800km radius that does anything like that . and dont feel right about doing my own with the hptunners program

[__--MUD--__] 03-15-2012 02:36 AM

Re: injector upgrde info
 
go to ls1tech.net or a sister site performancetrucks.net There are a number of mail order tuners between the two sites. They have done so many at this point, you tell them your mods and they get it pretty dead on.

rogco 03-15-2012 02:51 AM

Re: injector upgrde info
 
thank you


All times are GMT +1. The time now is 02:27 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.