Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   Side mirrors left and right not moving at all (http://www.elcovaforums.com/forums/showthread.php?t=43501)

H2005 05-01-2013 01:28 PM

Side mirrors left and right not moving at all
 
My mirrors will tilt up and down but not left to right? Could it be a fuse or are they done?

smileynialley 05-01-2013 04:07 PM

Re: Side mirrors left and right not moving at all
 
i'm having a similar issue

LoJac963 05-01-2013 05:46 PM

Re: Side mirrors left and right not moving at all
 
There is a thread on one of the forums out there that shows how to take apart the mirrors and fix the small motor inside.

That also entails removing your door panels (which I have yet to figure out how) to get to the mirror bolts.

Camou2 05-02-2013 12:20 PM

Re: Side mirrors left and right not moving at all
 
http://www.elcovaforums.com/forums/s...ad.php?t=12582

This link should still work and it is a good write up on the H2 mirror by Easy Ed. Side mirrors do not have a fuse. Some success by just cleaning the circuit board and motor/gear assembly after gaining access to the mirror.

Easy Ed 05-02-2013 12:57 PM

Re: Side mirrors left and right not moving at all
 
Might try this link, Ed

http://www.elcovaforums.com/forums/s...t=12582&page=2

Camou2, needed the &page=2 at the end to get to the page ;-)

LoJac963 05-03-2013 12:04 AM

Re: Side mirrors left and right not moving at all
 
that's a good write up, I need to just rip a door panel off to see how they come off/go on so I can get my billet door buckets installed!

fyr145 05-03-2013 01:35 AM

Re: Side mirrors left and right not moving at all
 
Quote:

Originally Posted by LoJac963
..........That also entails removing your door panels (which I have yet to figure out how) to get to the mirror bolts.


I've taken mine off a couple of times. It easier when you use a special pulling tool that can get right behind the clips and then you can just "pop" them off a lot easier. Let me know if you need more help with this.....I also have the OEM service manual too.


All times are GMT +1. The time now is 11:05 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.