Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   HEADER QUESTION (http://www.elcovaforums.com/forums/showthread.php?t=7421)

H2BRUTE 09-12-2005 11:12 PM

I'M GETTING CLOSE TO THE MAGNUSON MAGNACHARGER SUPERCHARGER INSTALL (PER YOUR RECOMMENDATIONS) FOR MY H2 AND ALSO WOULD LIKE TO CHANGE OUT THE STOCK HEADERS AND INSTALL SHORTY HEADERS AS WELL, ALONG WITH INSTALLING AN AIR RAID OR AIR FORCE ONE FILTER. ANY SUGGESTIONS ON EITHER THE BRANDS OF HEADERS OR TYPES AND PERFORMANCE AS WELL. COSTS SEEM TO VARY QUITE A BIT. ANY AND ALL COMMENTS GRATIOUSLY ACCEPTED. THANKS IN ADVANCE FOR THE HELP.

H2BRUTE 09-12-2005 11:12 PM

I'M GETTING CLOSE TO THE MAGNUSON MAGNACHARGER SUPERCHARGER INSTALL (PER YOUR RECOMMENDATIONS) FOR MY H2 AND ALSO WOULD LIKE TO CHANGE OUT THE STOCK HEADERS AND INSTALL SHORTY HEADERS AS WELL, ALONG WITH INSTALLING AN AIR RAID OR AIR FORCE ONE FILTER. ANY SUGGESTIONS ON EITHER THE BRANDS OF HEADERS OR TYPES AND PERFORMANCE AS WELL. COSTS SEEM TO VARY QUITE A BIT. ANY AND ALL COMMENTS GRATIOUSLY ACCEPTED. THANKS IN ADVANCE FOR THE HELP.

HUMMERcustoms.com/TAZ 09-13-2005 12:04 AM

I really like My stainless steel Dynatech Catback header system. I use the long neck to help with more low end torque. Do not know how much more I get but, at that time last year the performance guys said to stay with the long neck. I eliminated the cross over pipe and made true dual exhaust.

TAZ

DH22G 09-13-2005 12:26 AM

I am running HEADMAN headers and i love them!!!!!

HGW 09-13-2005 01:06 AM

Costs very based on the material used.

409 SS headers are cheaper than 304 SS headers by a considerable amount.

Also the welding type affects quality and price.

KenP 09-13-2005 02:10 AM

Borla headers here, but some on this board have had trouble with them. I haven't.

I had the AiRaid and dumped it in favor of stock with a K&N. With the SC I couldn't seal the filter intake well enough and was getting a high pitched whistle under any acceleration. Two others on this board had the same issue. Several others have not.

H2 Bill 09-13-2005 02:19 PM

All I can tell you is DON'T buy the Edelbrock shorty's. They do not stand behind them if the welds don't hold and they (the welds) won't if you are supercharging. I know of two other H2's here locally that have had the welds crack in the collector on the drivers side and Edelbrock won't do anything to remedy the problem. I am going to the Borla, at least they have a million mile warranty.

BAD_SUT 09-14-2005 02:13 AM

kooks makes a nice set but they are $$$$ SS 304.


All times are GMT +1. The time now is 09:59 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.