It kind of looks like the bag "separated" from the little attachment doohicky (technical term). Is that the case? Or is the bag ruptured?
Have you looked to see if your trailing arms have any slack in them that would allow the rear end to rotate any. On mine the front of the bag is lower than the back of the bag on both sides. Like the bottom mounts should be rotated forward or something.
Obviously it's hard to tell from the pics, but it "looks" like the bottom mount where it separated is rotated slightly rearward which would aggravate the situation of how mine looks.
Don't drive it. By the way, is the lower left picture with the truck jacked up. I ask, because I would assume the bump stop would be much closer to the top of the rear end housing.
Keep us posted.
|