Thread: SUT Rack & Cam
View Single Post
  #8  
Old 04-21-2005, 06:45 PM
rodster rodster is offline
 
Join Date: Feb 2005
Location: Vegas
Posts: 1,571
rodster is off the scale
Default

The four camera frame mounting screws are allen bolts with lock nuts on the back. The heads of the bolts can not be turned with a standard allen wrench -- it must be a hollow wrench to work with the pins centered in the hex depression. Good point about the dial nut on the back of the wheel cover, Tim. Securing it should be easy.

Switches -- Went with two mounted top center.
Attached Images
 
__________________
\'05 SUT
Reply With Quote