Follow these instructions. They work every time, if you do it right.-------------------------------------------------------------------------------
Service VME - Rattle from A Pillar Reveal Molding - keywords body interior noise panel part trim #PIT3518 - (Apr 5, 2005)
Service VME - Rattle From A Pillar Reveal Molding
2003-2005 Hummer H2
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in the PI.
SERVICE VME
A large number of H2 "A" pillar reveal moldings have been returned through the Warranty Parts Return Center with the customer complaint of a "rattle". The molding should not be replaced for this condition. Remove the molding and place double sided tape under the entire inboard edge where the molding contacts the windshield. Clean the windshield where the tape will make contact and reinstall the molding. This is, in fact, a more reliable repair than replacing the molding.
|