View Single Post
  #6  
Old 01-09-2003, 08:51 PM
NSXTC NSXTC is offline
 
Join Date: Dec 2002
Location: San Diego, CA
Posts: 143
NSXTC is off the scale
Default

Well, got the fax on replacing the billet door handle. Didn't say anything on exactly how to remove the trim panel. It just say 'Remove door trim panel'.

For those who are thinking about swaping out to the billet door, it's compliated...here are the first few steps:

1 - Remove door trim panel
2 - Remove water deflector
3 - Remove window <------------!!!!
4 - Loosen clamps securing window to the window module
5 - Remove outer window belt sealing strip
6 - Remove window through the bottom of the window frame
7 - disconnect outside door handle rod
8 - disconnect lock cylinder rod
etc...

There's also drilling and grinding that has to be done.

The illustrations are minimal at best. You'll have to be an expert mechanic to tackle this one. It's not one you can DIY that's for sure.


---------
H2SUT.com
---------
__________________
Regards,
David
----------
H2SUT.com
----------
Red metallic, Lux package, Poron backup sensors, throttle body by-pass, Independent dual DVDs, Volant air box, DRL mod, chrome hood handles and latch.
Reply With Quote