Thread: Please help, 3 problems.
View Single Post
  #4  
Old 03-01-2004, 01:23 AM
Klaus's Avatar
Klaus Klaus is offline
Hummer Guru
  
Join Date: Nov 2002
Location: CSA
Posts: 2,511
Klaus is an unknown quantity at this point
Default
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

<HTML><HEAD><TITLE>Service Information</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="Microsoft FrontPage 5.0" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<FORM name=topNavForm action=/servlets/CellHandler>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 863106
2003 HUMMER
H2
</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE>
<HR>
</FORM>
<H1>Power Window Inoperative - Passenger Door Front Door</H1>
<TABLE width="100%" border=1>
<TBODY>
<TR>
<TH vAlign=bottom align=middle>


Step</P></TH>
<TH vAlign=bottom align=middle>


Action</P></TH>
<TH vAlign=bottom align=middle>


Yes</P></TH>
<TH vAlign=bottom align=middle>


No</P></TH></TR>
<TR>
<TD vAlign=top align=left colSpan=4>


Schematic Reference: <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11282&amp;RefDoc=863106">Power
Window Schematics</A> </P>


Connector End View Reference: <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11706&amp;RefDoc=863106">Power
Door Systems Connector End Views</A> </P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S01>


1</P></A></TD>
<TD vAlign=top align=left>


Did you perform the Door Systems Diagnostic System Check?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step2
</P></TD>
<TD vAlign=bottom align=middle>


Go to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=12131&amp;RefDoc=863106">Diagno stic
System Check - Door Systems</A> </P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S02>


2</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Turn ON the ignition, with the engine OFF.
    <LI type=1>Disable the window lockout function.
    <LI type=1>Operate the passenger front power window in the UP and DOWN
    directions from the passenger switch. </LI>


Does the passenger front power window operate properly?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step3
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step4
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S03>


3</P></A></TD>
<TD vAlign=top align=left>


Operate the passenger front power window in the UP and DOWN directions
from the master switch.</P>


Does the passenger front power window operate properly from the master
switch?</P></TD>
<TD vAlign=bottom align=middle>


Go to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&amp;RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> in Wiring Systems </P></TD>
<TD vAlign=bottom align=middle>


Go to Step5
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S04>


4</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Install a scan tool.
    <LI type=1>Monitor the window lockout data parameter in the driver door
    module inputs list.
    <LI type=1>Activate the window lockout switch to both the On and OFF
    positions. </LI>


Does the window lockout data parameter change state
appropriately?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step5
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step16
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S05>


5</P></A></TD>
<TD vAlign=top align=left>


Monitor the passenger front window status data parameter in both the
driver and passenger door module input lists.</P>


Do either passenger front window status data parameters display an
active state without a window switch activation?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step6
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step7
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S06>


6</P></A></TD>
<TD vAlign=top align=left>


Is the active switch displayed in the driver door module input
list?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step16
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step15
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S07>


7</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Monitor the passenger front window status in the passenger
    door module inputs list.
    <LI type=1>Activate the passenger power switch on the passenger door
    module in the up and down positions. </LI>


Does the window status data parameter change accordingly?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step8
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step15
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S08>


8</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Monitor the passenger front window status in the driver door
    module inputs list.
    <LI type=1>Activate the passenger front power window switch on the
    driver door module in the up and down positions. </LI>


Does the window status data parameter change accordingly?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step9
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step16
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S09>


9</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Connect a test lamp to a good ground.
    <LI type=1>Backprobe the battery positive voltage circuit in
    connectorC1 cavityD at the passenger door module. </LI>


Does the test lamp illuminate?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step10
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step18
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S10>


10</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Disconnect the passenger front power window motor.
    <LI type=1>Connect a test lamp to a good ground.
    <LI type=1>Probe the power window motor up control circuit at the power
    window motor harness connector.
    <LI type=1>Activate the power window switch to the UP position. </LI>


Does the test illuminate?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step11
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step13
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S11>


11</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>With the test lamp still connected to a good ground, probe
    the power window motor down control circuit.
    <LI type=1>Activate the power window switch to the DOWN position.
    </LI>


Does the test lamp illuminate?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step12
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step14
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S12>


12</P></A></TD>
<TD vAlign=top align=left>
  1. <LI type=1>Connect a test lamp between the power window motor up and
    down control circuits.
    <LI type=1>Activate the power window switch to the UP and DOWN
    positions. </LI>


Does the test lamp illuminate in both positions?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step17
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step15
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S13>


13</P></A></TD>
<TD vAlign=top align=left>


Test for an open or short to ground in the power window motor up
control circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62194&amp;RefDoc=863106">Circui t
Testing</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&amp;RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.</P>


Did you find and correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step15
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S14>


14</P></A></TD>
<TD vAlign=top align=left>


Test for an open or short to ground in the power window motor down
control circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62194&amp;RefDoc=863106">Circui t
Testing</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&amp;RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.</P>


Did you find and correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step15
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S15>


15</P></A></TD>
<TD vAlign=top align=left>


Inspect for poor connections at the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&amp;RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&amp;RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.</P>


Did you find and correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step19
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S16>


16</P></A></TD>
<TD vAlign=top align=left>


Inspect for poor connections at the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&amp;RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&amp;RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.</P>


Did you find and correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step20
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S17>


17</P></A></TD>
<TD vAlign=top align=left>


Inspect for poor connections at the passenger front power window motor.
Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&amp;RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&amp;RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.</P>


Did you find and correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


Go to Step21
</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S18>


18</P></A></TD>
<TD vAlign=top align=left>


Repair the open or short to ground in the battery positive voltage
circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&amp;RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.</P>


Did you complete the repair?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


--</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S19>


19</P></A></TD>
<TD vAlign=top align=left>


<FONT color=brown>
<H4>Important</H4>


Perform the set up procedure for the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=71878&amp;RefDoc=863106">Servic e
Programming System (SPS)</A> in Programming.</P></FONT>


</P>


Replace the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=67591&amp;RefDoc=863106">Switch
Replacement - Door Lock and Side Window - Passenger</A> .</P>


Did you complete the repair?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


--</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S20>


20</P></A></TD>
<TD vAlign=top align=left>


<FONT color=brown>
<H4>Important</H4>


Perform the set up procedure for the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=71878&amp;RefDoc=863106">Servic e
Programming System (SPS)</A> in Programming.</P></FONT>


</P>


Replace the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=67590&amp;RefDoc=863106">Switch
Replacement - Door Lock and Side Window - Driver</A> .</P>


Did you complete the repair?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


--</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S21>


21</P></A></TD>
<TD vAlign=top align=left>


Replace the passenger front power window motor. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11922&amp;RefDoc=863106">Window
Regulator Motor Replacement - Front Door</A> .</P>


Did you complete the repair?</P></TD>
<TD vAlign=bottom align=middle>


Go to Step22
</P></TD>
<TD vAlign=bottom align=middle>


--</P></TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S22>


22</P></A></TD>
<TD vAlign=top align=left>


Operate the system in order to verify the repair.</P>


Did you correct the condition?</P></TD>
<TD vAlign=bottom align=middle>


System OK</P></TD>
<TD vAlign=bottom align=middle>


Go to Step3
</P></TD></TR></TBODY></TABLE>
<FORM name=bottomNavForm>
<HR>

<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 863106
2003 HUMMER
H2
</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE></FORM></BODY></HTML>
Reply With Quote