Install a 1000-1200 watt inverter...
Its big enough to run ANY power tool or even some microwaves...
The cost difference between a 1000-1200 wat inverter is about $40 or half a tank of gas.
$50 of welding cable will install it anywhere in the truck...
The first time you use it to run a needed power tool... or recharge a video camera battery you'll probably consider it paid for.
I used a Xantrex... however some of the "off-brands" are very good.
I agree that you don't need a top of the line inverter (pure sine wave)... but be careful about the "maximum cheapness" ones... just make sure you can return it if you get hissing in your electronics or your transformers overheat.
Beyond that... get it. You will love it! We use our constantly!! Its some of the best money we've spent on the H2.
Running the welding cable from the battery to the inverter under the back seat took about 2 hours.
No big deal.
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
|