If the dealer did the install, I imagine you have a case for insisting they do the fix.
You (or they) will need to cut the cam wiring a foot or so from the camera and then insert male/female plugs like the ones that are currently at the end of the camera wire. (Follow the existing wire through the bumper and within a few feet you should see the plugs.)
Once you've done that, you'll swing your tire open, unplug the camera and then remove the license holder.
If you have enough slack in the existing wires, you should be able to reuse the existing female plug without reinstalling it. If not, plug sets are only a few bucks at Radio Shack and so long as you can solder, install is a breeze.
__________________
\'05 SUT
|