<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dan:
Daveh2 - I have the same front end creak. Supposedly it's one of three things.
- front skid plate not tight enough
- crossmember bolts not tight enough
- A-arm bolts not tight enough.
I've tightened the skid plate and the crossmember but it still does it. This weekend I'll try the A-arms. I did notice that it would stop creaking for a while after a water crossing so something likes being "lubed".
</div></BLOCKQUOTE>
Mine does the same thing as well. During the rain it stops. It (the creak) returns within 20 minutes of dry weather driving. I am going to creak over to my dealer and take the service writer for a cruise. Based on the other good folks that responded that it may be fruitless to get under and start tightening the cross member bolts and skidplate. But knowing me I will most likely be under it tomorrow doing just that. It will bother the crap out of me if I don't make a run at it. I'll keep everyone posted!! "Dan and AmericanPatriot" You guys Rule!