RAP is retained accessory power (power that stays on until a door is opened). Yes the remote 6 is correct. That adaptor will simply allow you to retransmit infrared remote signals to the radio by unsing the steeering wheel controls. If you wire around the oem amp altogether, you can use the power that is provided by the Kenwood (5o watts x 4) to run all the speakers and sub. The GMK422 is perfect and you can cut the center brace and use that piece for a trim ring then mount the unit with the supplied brackets. Install is not too hard and would take me 1-2 hours. You will need to take apart the entire center console, the radio/heater bezel, and remove the lower dash panel on the driver's side (for access to the data wire to be cut for steering wheel control).
__________________
\'05 Slate Blue Sut w/ Magnusun, JBA headers, custom exhaust, 22\" MC2 RT5 wheels, Pioneer AVIC Z1 nav, Passport SRX, Vizualogic A1000 dual, bi xenons, fog xenons, dual optimas, and just gettin\' started!
|