View Single Post
  #2  
Old 06-12-2003, 11:29 PM
Hummie2's Avatar
Hummie2 Hummie2 is offline
Hummer Professional
 
Join Date: Nov 2002
Location: La Porte,TX
Posts: 391
Hummie2 is an unknown quantity at this point
Default

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR> Further, anyone have instructions on removing and re-installing the center console?! <HR></BLOCKQUOTE>

Important
For easy access to center console and I/P removal, the front seats should be removed.

Loosen the locking hex screw that fastens shift lever to floor console shifter.
Loosen screws that hold front trim panel and remove from center console.
Remove hinged arm rest cover from center console.
Remove top panel from center console.
Remove storage bin screws and remove storage bin from center console.
Disconnect electrical connections to center console end cap and unscrew from center console
Remove screws holding center console to center console bracket.
Remove center console.

This is the proceedure from the service manual. Sounds like a lot of work.

Be sure and pull the fuse for the amp before disconecting the plug on the harness and leave removed until the harness is reconnected. I remember someone saying they blew the amp by not pulling the fuse for it first.

[This message was edited by Hummie2 on 06-12-03 at 06:49 PM.]
Reply With Quote