Quote:
Originally posted by FiremanJay:
i think the fuel door is held on by double sided tape not sure though.
but it does stick out bad
|
That one is screwed into your filler neck bezel on the truck. open the fuel door, unscrew your gas cap. You'll see two bolts in there. remove those and than turn counter the whole assembly clockwise while pulling out away from the truck. the body is slotted, so the filler neck bezel just has to get past those tabs and will fall out easily once turned. It may be tough to turn, but it will come loose. So you'll end of having the whole filler neck bezel and fuel door in one piece. look at the back side of the fuel door and you'll see some screws that trap the door onto the bezel. Remove those and install your black fuel door.
If this doesn't sound easy, just send me a PM, and I can fax you some dirrections.