[W1N]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by kodiakz:
W1n, should all be the same as far as interfaces go. I would get the Peripheral gmah24b for the head unit interface, a gmachm for the chime module, and the soundgate rem v1.4 (I think that;s the model but it's late!!) for the steering wheel controls. You won't have a fader if you keep the oem amp, but I would condsider removing the amp and just using the Kenwood's power to drive the speakers as it has as much or more than the blows amp. If you do that, you can use a Peripheral gmco for chime and rap/switched power. Best kits makes a nice install bracket set specifiaclly for double din units in gm vehicles. </div></BLOCKQUOTE>

kodiakz,

as I will be removing the oem amp and will be using the Kenwood only, I was wondering that what are the audio inputs for all the speakers? Because there are only RCA outputs from the Kenwood and I doupt that there are RCA inputs for all the speakers just plain wire? Seems like I need a amp there anyways...

Generally you connect the receiver to the amp and the audio will be going over signal wire and then from the amp over regular wire. At least it looks like Kenwood doesn't have directly outputs so that I can connect it to the speakes.

Can you help?

Thanks!