View Single Post
  #5  
Old 05-22-2005, 07:16 PM
tower's Avatar
tower tower is offline
Banned
 
Join Date: Feb 2005
Location: Westwwod, CA.
Posts: 2,501
tower is an unknown quantity at this point
Default

Dan,

The bushings are 13/16ths inches long.
O.D. is 1"
I.D. is 1/2"
But any hole large enough to accept the 8mm bolt will do.

Until I got these, I used some "washers by the pound" from OSH (about $1.65). You will need a pair of lomger replacement bolts: M8 x 1.25 x 55 or 60mm. The original 40mm ones are too short to reach through the spacers.

Thats 8mm diamete, thread pitch of 1 1/4 t/mm, and a length of 55 or 60 milimeters. Hve fun & enjoy the new grilleguard.
Reply With Quote