Thread: Jack Tool Kit
View Single Post
  #10  
Old 08-21-2005, 01:22 AM
H2forMe H2forMe is offline
Hummer Veteran
 
Join Date: May 2005
Posts: 77
H2forMe is off the scale
Default

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
No idea if this is what you have seen already...



The following steps will tell you how to use the jack and
change a tire.
Removing the Spare Tire and Tools
The equipment you’ll need is behind and to the side of
the driver’s side second row seat. To remove the
equipment, do the following:
1. Fold the driver’s side second row seat down. See
60/40 Split Bench Seat on page 1-8.
2. Turn the wingnut (A),
which holds the jack,
counterclockwise
to release the jack.
3. Turn the wingnut (B), which holds the jack tool kit,
counterclockwise to release it.

</div></BLOCKQUOTE>

That's what my manual says but step 3, there is no wingnut (B), am I blind or something? in the picture in the manual, again it shows an H2 with the spare tire inside, that second wingnut is shown next to the jack.

Thanks for your help.
Reply With Quote