- Take out the gas cap (as you do each time you fuel...)
- Grab the inside of the black plastic "rim" area surrounding the gas cap and twist counter-clockwise about 1/4 turn. (DON'T try to pry it out, or beat the h*ll out of it like I did before I knew it turned!
) - Take the screws out of the back side of the new chrome (or black) fuel door
- Set your "rim" upside down over the fuel door (note the "top" so your door will be straight...)
- Reinsert the screws and tighten to hold door to rim
- Replace into housing and twist clockwise to lock into place
- Reinsert the fuel cap
- DON'T lose the fuel door key!!!
