good luck.
they will probably tell you to get a Ron Davis aluminum radiator. Don't do it.. find another option.
I'd have your trans checked by a qualified mech to make sure there is nothing actually wrong with it. If he says it's ok then get a trans cooler and a deeper trans pan.
I spoke the folks at Mag-hytec today (jerry) 818-786-8325
http://www.maghytec.com/index.asp?Pa...ATS&Category=3
The pan will fit our transmissions. just make sure you've got more then 4 1/2 inches between the exhaust cross over pipe and the flange where the pan bolts to the bottom of the trans.
If not then get a trans cooler at the very least.
Personally I'd have someone route the trans fluid lines out of the radiator and plug the holes. Leaving the stock trans cooler in line will probably be a good thing just add a secondary cooler.