[quote=bjc]It looks like the H3's cross-member will serve as an additional brace in the large area.[quote]
Your right on bjc.
As for mounting, there is an angle iron brace welded to the back subframe between the transfer case and the fuel tank which will have 4 holes drilled into it. In the front there is a L-shaped angle that was welded to the subframe underneath the engine (3rd pic). There will be 2 mounting holes drilled into the angle. Mounted w/ 3/8th grade 8 bolts. That's it in a nutshell.
I'm looking forward to attempting to break it.
