Quote:
|
Originally Posted by ree
Can't you wire it to a circuit that's on when the key is in the run position, put the key in and turn it to run, but don't start the engine? Yes you have to put the key in, but you don't have to start the truck.
|
I prefer to have at least one set of lights available when the ignition is off - I hate the chimes and sometimes at night it's nice to have some serious light.
That said, you should be able to manually wire the relay from an open ACC/IGN position on the fusebox. I can't remember what # I used, but there are quite a few available switched spots - just run a (12+ gauge) wire from the fuse box to the power input on the relay (ignore the schematic) - the switch in the cab would work, but the relay would have no power unless the switch was on.