Quote:
|
Originally Posted by BACKNBLACK
Install was easy. Here is what you need to do.
1- Get (2) Black H2 Handles from your local dealer (FREE)
2-Take off your H3 Hood Panel
3- Grind off the mounting screws on the bottom of the H2 Handles.
4- Mark your H3 Panel for Drill and Drill your 4 Holes for the Handles
(2 Holes on each Side)
5- Install your handles by screws from the bottom with Drywall, Metal or wood screws.
6- The Top will be flush mount but the bottom will be raised a bit, I bought black silicone and filled in the gap to make it look flush.
7- Put the Panel Back on and you are done.
******INSTALL TIME IS LESS THAN 30 MINUTES******
|
It looks good, but I think it would look better if you ground the front to a flush angle instead of using the silicone filler.