View Single Post
  #5  
Old 09-26-2006, 09:39 PM
f5fstop's Avatar
f5fstop f5fstop is offline
Hummer Guru
 
Join Date: Jul 2005
Location: Idaho
Posts: 4,744
f5fstop is an unknown quantity at this point
Default Re: Ignition power wire issue

I guess what confused me is the ACC wire and the thought of one going to the factory head unit. There is no red ACC wire. The radio is not on the RAP circuit. The BCM directly controls the On/Off of the radio, and the power to the radio is supplied by an Orange B+ wire.

Not sure what the class 2 wires would do, since the aftermarket radio does not require the class 2 signals. Usually, the splicing of the class 2 is to allow the serial data to flow from the Onstar and XM modules.

But, if you fixed it...cool.
__________________
Black Sheep Hummer Squadron
(ME TOO)
Reply With Quote