Quote:
|
Originally Posted by garnerbiker
What a deal! OR, you can do it yourself for 30 bucks. Just be sure to get a fluid pump ($5) and the synthetic oil for the rear. The transfer case requires to fill above the fill plug. Just cap it off when it gets to the plug and fill the rest of the amount from the sensor just above it. No big deal.
|
Your statement on the t/case fill is
partially correct for some vehicles, and
incorrect of other vehicles.
For vehicles built prior and including 5GTDN136968105387, you just don't remove the sensor and fill to the sensor. You fill to the fill hole, as you described, and then remove the speed sensor and
ADD ADDITIONAL 8.45 oz of fluid through the sensor hole.
If the vehicle was manufactured after the above VIN number, the additional fluid is not required.
In addition, the front diff also requires SAE 75W-90 Synthetic Axle Lubricant.
As to changing it prior to recommended specs, it's your money.
