Quote:
|
Originally Posted by CslRkH2
4. I combined the two fronts 4 wires down to 2 (14 gauge) wires. Then the two from the rear
|
Actually these 4 wires go directly to the engine compartment near the battery. They go under the marker lamp down under the windshield molding into the engine compartment.
The switches are in the cab, and the wires run out the marker light seal (passenger), down the outside like the power wires to the relays in the engine compartment also by the battery.
TIP (received from TIMGCO): Use both sides of the windshield so that you can get the windshield molding to lay flat with wires behind it. I ran the power wires down the Driver side and the switch to relay wires down the passenger side.