[HUMMERcustoms.com/TAZ]

Hey Phil
Are we both talking about the lower left corner of radiator with metal lines running to radiator looking from drivers seat. My memory may be flawed but, would not suprise Me with all going on with illness. I thought for sure We had red tranny cooler fluid drip on floor? I appologise if i gave out the wrong info. But, anyway the bottom left corner of radiator from driver seat has metal lines on 2005 and I'm assuming up that have to have these lines cut as We could not get enough slack to get room for the 2500 HD electric fan kit I put together and sent to W1N to install.

I have run all the brands either on H2 or my 99 Silverado that is beefed up with power and to help I tried other brand fans on it as well. I finaly tried several of the V boxes with each burning up as well as changing out 4 fuse holders as Flex a lite has gotten a bad batch of fuse holders they blamed the problem on. lt was later after them sending the 4th fuse holder that they sent a new controller box and told Me it had been changed. I still blow a fuse ever so often but, even though I would not use one on a H2 I do not hesitate to use Flex a lie on My other rides. Their support and caring for customer is unsurpassed.

When i found out I could make 2500 HD fan kit work in H2 I would not trade it for anything else on market. Allen has a harness that just plugs up and also connects where the wire should be at ECM to control fan on and off by temp. Allen builds a great harness.

Sorry Phil if I was wrong as to what the metal lines were flowing to radiator. I made the change almost 2 years ago and memory may be fuzzy on what fluid are carried in line. When doing the conversion I just made sure it was not A/C lines or something else critical.

TAZ