Quote:
|
Originally Posted by PhilD
Yes.
Can't recall, but pretty sure it is metric, so 6 or 8mm. Just take the existing one out and take it to the store with you.
|
The zerk fittings are the 1/4" size.
I replaced mine about 5 minutes. I like these 90 degrees valves so much that I also changed a couple of the lube ports on my Suburban too.
I can reach that valve with my skid plate ON. However, I have an H2Oguy aftermarket skid plate. In any case, you need a grease gun with at least an 18" hose.