Quote:
|
Originally Posted by TXSUT
Got it mounted. I had to shim the wheel away from the mount to account for the fact that the thickness of the Weld wheel's hub is less than that of the OEM wheel. I also had to hack the crap out of my license plate holder to make it line up correctly, so I'm thinking about relocating it to the bumper.
Thanks again for everyone's input.
Pete
|
Pull your wheel back off. Take a grinder to that hub that sticks out and throw that license plate bracket in the garbage.
You have a very nice wheel and it deserves full view back there. Once you cut that hub off, black touch up paint, put your new center cap on. And your done with that. The plate you can mount on teh PS SD next to the tow hook. I posted some pics on an earlier post. Auto zone will have a light you can screw to the bottom side of your tire carrier.