Quote:
|
Originally Posted by HumbleAg
Pioneer AVIC-D2.
Ran into another snag yesterday, so probably won't get it in until next weekend.
Using a Nucleus adapter for bus/chimes/onstar (all in one unit unlike Peripheral and PAC). Seems to work ok, but when chimes go off there is a pretty loud pop from speakers. I've traded e-mail with their tech support and they suggested a resistor on the remote amp turn-on line, if that doesn't work I'll start over with the other guys.
Also putting in a backup camera (ND-BC1) and a cheapo cable for my MP3 player (non-ipod) into the IP-bus.
I'll post some info and pictures once it actually works correctly.
|
Make sure not to use the ground circuit supplied to the original radio. Make your own ground. A good place is one of the bolts holding the bracket to the cross-car beam behind where the radio sits.
A bad ground can cause a popping noise when certain functions are performed, and MIGHT be responsible for the pop.