[JZimm]

Dan,

I would recommend that you avoid the stainless/polished version at this time. From what I could learn from a distributor the stainless ring is a press-in fix for clearcoat peeling problems on the machined version. I went through seven of the stainless lip wheels before giving up. I experienced two problems with the stainless versions. One issue was that the ring would migrate to the outside of the wheel giving the impression that the wheel was bent/warped while rotating.

Secondly, there was gap betwee the bottom of the ring and the wheel with contributed to dents from highway rocks and trapped water during washing and weather.

the four machined lip wheels that Andrew has retained should be in new or very close to new condition.

Please let me know how it works out.

Regards,

Joel