View Single Post
  #9  
Old 04-17-2007, 04:11 AM
K9sH3's Avatar
K9sH3 K9sH3 is offline
Hummer Authority
 
Join Date: Oct 2006
Location: Cape Canaveral
Posts: 1,808
K9sH3 is on a distinguished road
Default Re: Wiring Question for PIAA lights

Quote:
Originally Posted by f5fstop
very good advice...Make sure to use a grommet. That firewall will be as sharp as a razor and will cut the wire in no time. The grommet protects the wire from the metal, while the RTV keeps your feet dry. Also, make sure that you install the fuse as close to the power source as possible. That way if the wire shorts, it blows the fuse at the power source.


Also, Make sure that you don't have it running hot at all times. It could drain your battery. I learned the hard way.
__________________
Theres a hole in my head, where the rain comes in
Reply With Quote