View Single Post
  #6  
Old 04-24-2007, 03:58 PM
BlueTJCO's Avatar
BlueTJCO BlueTJCO is offline
Hummer Guru
 
Join Date: Sep 2003
Posts: 2,089
BlueTJCO has a little shameless behaviour in the past
Default Re: (Geek)Fried my dam mother board

Quote:
Originally Posted by bparker
Never used a static strap (prolly should) as i alway touch the case to discharge any static before I touch anything inside.

Also, I am running dual 64 bit xeons - never liked the AMDs (heat related)

Anyways, now i contemplate if I have the bawls to try this again with my new motherboard that will come in tomorrow... or just leave it be with only 1 video card in there.

Here is the layout of the slots on this HP board...

------- PCI
-------- PCI-Express (the BFG 8800 gfx card was here)
------- PCI
---- PCI-Express x8 prime (wtf)
---------- PCI-X 133 (wtf) (the voodoo card was in this slot)
---------- PCI-X 100 (wtf)
---------- PCI-X 100 (wtf)


I would try it again. Just be careful to discharge and static elec before you begin and make sure the PC is powered off before switching the video cards in and out. I'm sure you know this but ya never know...........

Microsoft has a site that you can check the compatability on all video cards for the 64bit O/S........maybe look at that...........
__________________
"moonie"
Reply With Quote