[GasGuzzler]

Hey Las Vegas

How did the AVIC-D3 installation go? I am doing the install myself. I am curious - where did your installer connect the speed sensor wire? There are 3 possible places that I know of - 1) In between the battery and the engine block 2) Green/white wire on the 24 pin plug goin to the instrument cluster and 3) On a plug going into the (some) stock radios.

I am curious how your installer did it.

Thanks,

GasGuzzler

Originally Posted by LV_H2

Thanks Bill,

I am happy to hear that people have aftermarket units installed in the H2 without any electrical problems. I had a bad experience with the "ultimate ipod adapter" (see other thread).

I found an installer who does the work for my local Hummer Dealer and is very familiar with the H2. He recommends the Peripheral adapter, and will be installing an AVIC-D3 for me tomorrow. I use ONSTAR, and I am mainly looking for the iPod interface, which seems to be a more direct connect on the D3 than on the Z2.

I am having mine done "thru the dealership" just in case there are any issues!

Thanks again for the feedback.