Quote:
|
Originally Posted by HUMTECH
Broken wire at the shifter assembly, right at the connector for the park position switch, or the park position switch can be stuck this usually happens over time with coffee and other liquids spilling in the cupholders, once you remove the cupholers by prying carefully with A flatblade it is just held with 3 clips. you can access the shifter assembly, push the button on the side of the shifter and you should be able to rotate the key back and remove it. then inspect the wiring at the switch, if it is ok the switch is gummed up.
|
You were right on! The red wire going switch had a gash on it a the wire was broken inside the insulation. Nothing that a wire splice heat shrink and a heat gun wouldn't fix. Now I'm back in business
Thanks Million for all of the great suggestions
