Re: Anyone have another solution for extending bump stops?
On the H3, I used the longer Cognito shocks. This allows me to "bottom" all the way down to where it did from the factory. However, the bump stops are not touching as they did from the factory. This causes me to have more body roll, nose diving when braking and getting blown around by side winds on the highway.
Can anyone confirm if the factory stops are pressed in or held in by a screw or bolt? They appear to be pressed-in, but there is also a hole in the center that may have a screw/bolt through the hole.
It may be possible to make a spacer similar to what I did on the H2 and run a longer bolt through the spacer into the frame or bump stop mount.
|