Re: Front axle
I ran into same problem when I did my front diff. Here are my notes from when I did it myself. It looks like pints are referenced for the front diff when it should be quarts. (Please note I have PML tranny & rear diff cover):
OIL & FILTER
-ENGINE: Mobil1 5W-30 Synthetic Oil (requires 6 qts) & Mobil 1 Oil Filter M1-107
-TRANSFER CASE: use Redline High Temp ATF (requires 2.0 qts Dextron III)
-TRANNY: use GM factory Dextron VI fluid!!! (requires 14 qts total, just dropping pan takes 7qts with PML cover)
-FRONT DIFF: use Redline 75W90 (requires 2.5 qts - 75W90 gear oil)
-REAR DIFF: use Redline 75W90 (requires 4.5qts with PML cover - 75W90 gear oil)
|