Hey Joe...
It's lifted, but done custom by Me. Since I have wide wheels, I needed to still be able to flex. Since the stock width wheel can go up into the wheel well, I lost some flex by going with wide wheels. Here's how I remedied the issue:
Custom shock extension brackets made from Cognito brackets. I found theirs to be too tall, so I measured all of my travel after cranking torsion bars and fabbed the brackets to the exact length needed. I then made some custom bump stop extensions to take up the slack between the bump stop and the control arms. Added 1" coil spacers in rear.
I now have about 2.5" inches in front and 1" in rear - over stock.
Planning on going to 37s in near future. If anyone wants a really good deal on these kinda tires, I have a brand new spare I will let go really cheap, as I about to change sizes to the 37s.
Quote:
|
Originally Posted by Smokin Joe
tomp,
Is your H2 lifted?
|