View Single Post
  #3  
Old 10-28-2007, 05:48 PM
RippSpeed RippSpeed is offline
Hummer Veteran
 
Join Date: Oct 2007
Location: Rowland Heights, California
Posts: 227
RippSpeed is on a distinguished road
Default Re: Hypertech Max Energy Programmer

Quote:
Originally Posted by Hucky
When You say Download,

well, I plugged it into the OBDII plug in the Hummer just below the dash in the driver side.

Quote:
Originally Posted by Hucky
How does the process work, start to finish?

step by step:
1) plug in into obdII plug (in driver side right below steering wheel)
2) turn key to the on position ( make sure you turn off the headlights)
3) the programmer will check for trouble codes
3a) programmer will read out trouble codes if you have any...
3b) programmer will ask you if you want to clear trouble codes before continuing the programming
4) enter into hyper programming mode
4a) programmer will ask you wether you want to tune for regular (87 octane ) or premiuem (91 or 92 which ever you guys have) tune
4b) programmer will ask to set rev limiter
4c) programmer will ask you if you want to change top speed limiter to match your tires
4d) if you have after market tires
4e) if you have change the rear axle gear ratio
4f) if you have automatic transmission
4f.1) if you want to change the shift points
4f.2) if you want to change shift firmness
4f.3) if you installed a after market shift kit
5) programmer will tell you what you selected...
6) programmer will read and store the factory program
7) programmer will reset the ecu and write the program with the selected parimeters you selected
8) programmer will tell you prgramming is done. turn key off for 30second and press y to unplug programmer...
9) your done!!!

Quote:
Originally Posted by Hucky
Post up your gas mileage without it and now with it, please

Thanks

by the way it looks I may have gain like 30+miles to the tank...nothing big but thats been me driving with my lead foot... I'll post up how it really consume gas when I head to san francisco with the family this November 16th...
Reply With Quote