Quote:
|
Originally Posted by wannabeH3
ok you have to take off the left A-pillar molding to get at your reverse wire, then you have to tap into a wire behind your lower right kick plate for the speed sense wire, i had to run my mic wired thru the head liner to replace the mic that is for the onstarm there is about 50 million cables i had to splice and attatch. i did not use the GMOS connection as i ditched the onstar crap, so i used a 20 dollar harness that replaces the door chime. over all it took me about 2 weeks to get it all how i wanted. and i did a real ****ty job too  but it works good tho |
wow.. you did this the hard way. i used the Axxess harness and it hooked right up. after i made the connections of the 2 plugs just installed in like 10 min.. EASY.. LOVE IT..
