Re: valve cover gaskets
you do not have to use a tubing bender. you are not reshaping the lines, just moving them up out of the way. I suggest you take the line clamps off on the intake side so they lift a little easier. secondly the reason your gaskets are leaking is because you are not pulling a crankcase vacuum. most like the resperator is not working. either its plugged with sludge or the hoses & seals are cracked and leaking. check where the hose attachs on the sides of the intake and make sure its all there & working.
when you remove the lines from the injectors make sure you gaurd againest dirt getting into the injector opening. use plastic caps or something to keep the dirt out.
|