
04-11-2008, 03:08 AM
|
 |
Hummer Veteran
|
|
Join Date: Jan 2008
Location: High in the Colorado Rockies
Posts: 210
|
|
Re: -06 torsion bars,keys,bolts or something else different than -03 ?
Quote:
Originally Posted by Hammer
thanks for a good information
what I´ve been told
if I crank my stock keys to archieve +2" lift or buy these aftermarket keys same result: stiffer ride (if used without cognito kit).
|
Yes, but the stiffer ride is caused by the fact that the shocks and upper control arms bottom out to soon. And even if the correct replacement shocks are not bottoming out any more, the factory upper control arm is still bottoming out on the bump-stop way too soon, this is what is giving you that stiff harsh ride
Quote:
I might not need aftermarket keys with cognito kit if I can crank my stock keys to archieve lift I want right?
|
Right!
Quote:
"Maxx Cam 2 can lift the front of your truck up to 3-full inches or lower it 2.5-inches with virtually no loss of ride quality"
|
Not true, because the UCA is still bottoming out on the bump-stop way too soon.
Quote:
"ReadyLift® keys are guaranteed never to affect the OEM ride and will not add more pressure on the stock suspension components."
|
This really is only half true, but cranking the torsion bars will not add more pressure on the stock suspension.
Quote:
It seems that no one can tell me will cognito kit work with ranchos lift I´ve send various email to ranchosuspension, cognitomotorsports, trailduty just to name few still after week no answer yet...
|
You might try a phone call. The person you need to talk to at Trail Duty is Phil. Toll Free (in the US): 888 711 5908 - Tel: 361 288 2466 - Fax: 361 288 2196
Might just be a whopping phone bill from Finland though!!!
.
Last edited by SummitUp : 04-11-2008 at 05:23 AM.
|