[cdmintmi]

OK thanks man, makeing sure I didnt mess up the easy part.

With the PIAA wiring harness there are two wires going from the big ol relay to a female conector that connects to a male plug that leads to the switch. I just spliced into the extra wires already running through the firewall for the OEM marker/roof lights and connected on the other side since I dont plan on getting them. Now this conector has an extra (free) wire coming from the relay (female) side of the connector that (Im pretty sure) says it is for power to the switch. Im pretty sure I need to connect it to a hot wire under the dash. Prefferably one that is hot only with engine running, but thats not really that important, Im pretty good about turning off lights. I guess I could splice the wires after the connector (leaving said connector under the hood and not in cab) and get power under the hood, but there has to be a wire under the dash that should work.
I have a .pdf file of the wiring diagram from PIAA so I tried to take a pic with my camera while it was up on my TV. Well here is the pic if anyone can help sorry for the blur but its a picture of a TV screen: In the diagram the problem Im having is with location of a wire to splice for (2 white with red dots switch power (+)...)