Re: ***Air Ride Suspension - What do I do?***
you just need to take it to the dealer and with the tech 2 scan tool need to read the ride height sensor voltages. If they are out of range what i have done is modify the sensor arms to put the height sensors within spec by cutting out part of the arm if they are too long and welding them back together. once the sensors are reading in spec just set the rear height by eye and do a trim height learn with the scan tool. Whenever the sensors are out of range a code will set and the system will be disabled. Hope that helps. expect them to charge 2 to 3 hours to figure it all out and do the mods but then the system will work.
|