Quote:
|
Originally Posted by StockStar
Thanks for the replies. So, I understand exactly what you are saying about the 22?s and that idea is out. My tire guy basically echo?d the same things as you did. Ok, so with 37x13.5 -20?s?.. My tire guy said I should be good. Is he correct? He has claimed to install these with no issues. My rims are 20x9
|
depends on back space/ offset. Your sway bar up front will get rubbed. Most stock setup's will do this on onse side at full turn. no worries. Many of have run that, wheeled that, and no issues, smae with the frame up front...and long as it is not excesive. 13.50 looks great. Keep in mind if you have rear air sups. you need to keep an eye on your rear sensor arms inside that wheel well. I can only assume you ar enot going to wheel the truck sinceyou were looking at 22's, so you should have no issues.
I ran 18 x 9 with 5" back space and a 35 x 12.50 Toyo MT tire, and have comparible rubbing as with stock. You will get more with the 13.50 wide and 37" diamter, but nothing major. Have him test fit the fronts.
Or list up what wheel/ tire make/ model you are looking into. More than likely, someone has your setup already.