Using wheel spacers with 35" MT's?
Hello All,
I recently added 35" Toyo MT's to my 07 H3 and cranked the torsion bars about 2.5 turns to raise the front end up a bit. I'm still experiencing a slight rub on the sway bars. Will utilizing 1/4 wheel spacers cure the rubbing issue without having to extend the wheel studs? I don't really want to go with a full 1 inch spacer as of yet to cure the issue since I have a set of 1/4 spacers on hand.
Mr. Gasket 1/4 Wheel Spacers 6x5.5
__________________
2007 H3 "Tactical Edition" - Black
Gobi Stealth Rack & Ladder
TrueFlow Intake w/ inlet upgrade
Borla Catback Exhaust
PCMforless Tuned
Bilstein Front & Rear Shocks
Hellwig Rear Anti-Sway Bar
35" Toyo Open Country MT's
____________________________
2005 H2 SUT - Military Green
K&N FIPK Intake
Gibson SS Extreme Exhaust
Predator 87 Octane Tune
20" XD Strike 807 Wheels
35" Toyo Open Country MT's
|