Re: fabtech tie rods
The reason Fabtech won't endorse their tie rods for H2's is because the inner rubber boot will only clear the sway bar by about 1/8 inch in a full lock turn. The boot can actually be torn when turning hard while off-roading. Dozens of H2 owners run Fabtech's with no problems however.
This pic tells the story:
The cure for this situation is to replace the sway bar links with Cognito sway bar links. They're longer than OEM and will give about 3/4" clearance:
Interesting thread on Fabtech vs. Cognito tie rods <Here>.
__________________
'05 H2 Lux, 37" KM2's on 17" Hutchinson Double Beadlocks, Cognito UCA's, Cognito Sway Bar Links, Custom Hydro-Assist Steering Upgrade, Eaton Front Differential Locker, 1" Rear Coil Spacers, Chevy Green Key Torsion Bar "Lift," Bilstein Shocks, Warn 9.5ti Multimount Winch, Dual Optima Yellow Top Battery's, Piaa & Hella Off-road lights, Gobi Rack, Tru-cool External Transmission Oil Cooler, Diablo Predator Hi-Octane Tune.
|