Quote:
|
Originally Posted by wpage
Getting a similar message...
"Service Stability System Traction Failed"
Since this alarm came in on the DIC the cruise control no longer engaged.
How can I clear this or do I need the big ride to the dealer @ 3 3/4 years and 28,000 miles. Will warrentee cover?  |
The cruise control is tied into the Stability System..which will turn off cruise if you do any kind of a advoidence maneuver ..so they are related to each other.
Two weeks ago I received a Check Engine light... I called OnStar. They said it came back as a sensor in the emission system. Any way they said it was ok to drive the 3 but to go to the dealer within 7 days.
But first I disconnected the negitive battery terminal for about 1 min. Then re connnected it and started the 3. The light was gone and so was the code set. Re-checked with OnStar and they said I was cool.
I would first try disconnenting the neg battery terminal for 1 min and re connect it and see what happens. Also while it's off clean the terminal and connector.
But keep in mind if you do that you will lose all saved destinations in you NAV unit. If you have one.
Good Luck..