Quote:
|
Originally Posted by seventwozero
My fuel door is held to the plastic fuel cap liner by allen screws and nuts, so it must be removed in one piece to get the door off.
- open the fuel door
- removed the gas cap
- removed the 3 small hex screws that surround the fuel fill
- grab the fuel door/liner assembly and twist (this sort of has a quarter turn twist lock into the body panel
- pull outward (after the twist) to remove the entire assembly
To answer your question, no. If you removed the fuel door you will have a liner and no trim to fill the body gap. The style of fuel fill your thinking of is actually a part on it's own. A black liner/bezel replacement without a fuel door. You should be able to pick up one of these off ebay, although I've never looked.
I looked, here is a chrome one.. didn't see any in black |
Thanks for the help. I bought an OEM pocket and took the door off last night. Any suggest on how to get the new pocket to turn and lock into place? There is nowhere to grab that thing and for the life of me I cannot get that sucker to turn more than and 1/4" or so.